Panasonic UF-4500 Operating Instructions - Page 42

Customizing Your Machine Fax Parameter Table No. 133 135 136 137 142 Parameter JOB BUILD JUNK FAX FILTER RESTRICT D. DIAL RE-ENTER D. DIAL LAN PC-FAX Setting Number Setting Comments 1 OFF Selecting whether the machine performs Job Build when 2 ON the total number of documents exceeds the maximum capacity of the ADF, or when scanning the documents manually one at a time. If you place the documents on the ADF within 5 seconds after the ADF scan, the ADF scan will continue for the current scan. (Maximum number of scanning sheets is 255 pages for one job.) The Quick Memory Transmission feature (Fax Parameter No. 82) is not available when the Job Build is set to "2:ON". Up to 250 pages can be stored. When the number of pages exceeds 255, the memory overfull message will be displayed. Select "Yes" to start transmitting, or "No" to cancel. If no action is taken within 5 seconds, the machine will start transmitting the stored originals. Function to prevent direct mail FAX and unnecessary FAX messages. 01. JUNK FAX FILTER 1 INVALID 2 VALID When set to "VALID", the machine will not receive the faxes from the senders whose numeric ID has been registered as a junk fax number. The denied number IDs can be registered in "04.ID NO. REGIST.". 02. RCV WITHOUT ID 1 INVALID 2 VALID When set to "VALID", the machine will receive faxes from senders without numeric ID registered. (This setting is available only when "01. JUNK FAX FILTER" is set to "VALID".) 03. RECEIVED ID PRINT 1 INVALID 2 VALID When set to "VALID", the sender's numeric ID and received time are printed at the bottom of the received faxes. If the sender's numeric ID is not registered, only the received time is printed. (This setting is available only when "01. JUNK FAX FILTER" is set to "VALID".) 04. ID NO. REGIST. (NO. 01-30) Register fax numbers as junk fax number. Up to 30 fax numbers can be registered for junk fax number. (Including numerals "0-9", blank space, and + symbol.) (When comparing the sender's numeric ID to the registered junk fax numbers, blank spaces between numbers are ignored.) 1 INVALID Enable or disable the Restrict Direct Dial function. 2 VALID When set to "VALID", manual input destination Tel No. and "Redial" button are not accepted. 1 INVALID Used to set whether to display the address reinsert screen 2 VALID when indicating the address for direct dial, inputting the mail address for Internet FAX, redialing or inputting the address for confirming the address. When set to "VALID", unit will require input destination Tel No. or Mail address twice for confirmation. Unit will proceed transmit job when destination data is matched. This setting is not available when the Restrict Direct Dial function is set to "VALID". 1 INVALID Selecting whether the machine accepts and performs G3 2 VALID relayed transmission. (Relay Station Functions) (For UF-5500 only) 42