Panasonic UF-4500 Operating Instructions - Page 41

Programming Your Machine Customizing Your Machine No. Parameter 77 LOGO/DEPT. CODE 82 QUICK MEM. XMT 91 SET ENTERED STN 99 MEMORY SIZE (Flash Memory) 101 MULTI PRINT 102 LCD CONTRAST 117 MULTI STATION 125 CONFIRM STNS Setting Number 1 2 3 1 2 1 2 1 2 1 2 1 2 1 2 Setting Comments INVALID MULTILOGO DEPT. CODE INVALID VALID INVALID VALID - Selecting whether the machine performs the Multiple Logo or Department Code operation. (See page 110 and 118) Selecting whether the machine performs Quick Memory Transmission. (See pages 50 to 52) INVALID: Stores all documents into memory first before dialing the telephone number. VALID : Starts dialing the telephone number immediately after storing the first page. The Quick Memory Transmission feature is not available when the Job Build (Fax Parameter No. 133) is set to "2:ON". Selecting whether to press the SET key when entering station(s) with One-Touch Dialing or Abbreviated Dialing or entering a telephone number with keypad. Displays the memory size. OFF ON NORMAL DARKER INVALID VALID INVALID VALID When the machine receive the faxes with MULTI PRINT set "ON", the machine will print the received faxes by the number of copies which you set beforehand. Setting the LCD contrast on the control panel. Set the default setting for the Multi Station function. INVALID: The document is sent to a single destination only. VALID : Allows sending the document to multiple destinations. Set whether to confirm the destinations. When set to Valid the document cannot be sent unless the destination is confirmed. This function also operates when the addresses are specified with Group Dialing or Program Dialing function. If an address has been altered (added or removed) when confirming addresses, the address confirmation message will appears again when transmitting the documents (pressing the start key). Continued on the next page... 41