Pioneer AVIC-7200NEX Owner s Manual - Page 66
Displaying the firmware
View all Pioneer AVIC-7200NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
System settings 3 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 4 Press the button. The adjustment results are saved. 5 Press the button once again. Proceed to 16-point adjustment. 6 Gently touch the center of the "+" mark displayed on the screen. The target indicates the order. When you press the button, the previous adjustment position returns. When you press and hold the button, the adjustment is canceled. 7 Press and hold the button. The adjustment results are saved. Setting the dimmer Setting the dimmer trigger The default setting is "Auto". p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Trigger]. 4 Touch the item. Auto: Switches the dimmer to on or off automatically according to your vehicle's headlight turning on or off. Manual: Switches the dimmer to on or off manually. Time: Switches the dimmer to on or off at the time you adjusted. Setting the dimmer duration in day or night The default setting is "Day". 66 p You can use this function when "Dimmer Trigger" is set to "Manual". p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 2 Touch [Dimmer Settings]. 3 Touch [Day/Night] to switch the following items. Day: Turns the dimmer function to off. Night: Turns the dimmer function to on. Setting the dimmer duration optional You can adjust the time that the dimmer is turned on or off. The default setting is 18:00-6:00 (6:00 PM-6:00 AM). p You can use this function when "Dimmer Trigger" is set to "Time". p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Duration]. 4 Drag the cursors to set the dimmer duration. You can also set the dimmer duration touching or . p The time display of the dimmer duration adjusting bar is depending on the clock display setting. Refer to Setting the time and date on page 74 Adjusting the picture You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake. 1 Display the screen you want to adjust. 2 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 3 Touch [Picture Adjustment]. 4 Touch the item to select the function to be adjusted. Brightness: Adjusts the black intensity. (-24 to +24) Contrast: Adjusts the contrast. (-24 to +24) Color: Adjusts the color saturation. (-24 to +24) Hue: Adjusts the tone of color (which color is emphasized, red or green). (-24 to +24) Dimmer Level: Adjusts the brightness of the display. (+1 to +48) Temperature: Adjusts the color temperature, resulting in a better white balance. (-3 to +3) p With some pictures, you cannot adjust "Hue" and "Color". When you touch [Rear View] or [2nd Camera], the mode changes to the selected camera mode. By touching [Source], [Navi] or [Apps], you can return to the selected mode. 5 Touch , , , to adjust. p The adjustments of "Brightness", "Contrast" and "Dimmer Level" are stored separately for the on/off status of the dimmer function. These are switched automatically depending on whether the dimmer function is on or off. p The picture adjustment may not be available with some rear view cameras. p The setting contents can be memorized separately. Displaying the firmware version 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 2 Touch [System Information]. 3 Touch [Firmware Information].