Pioneer AVIC-7200NEX Owner s Manual - Page 77

Appendix The picture is extremely unclear/distorted and dark during playback.  The disc features a signal to prohibit copying. (Some discs may have this.) - Since this product is compatible with the copy guard analog copy protect system, the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction. iPod cannot be operated.  The iPod is frozen. - Reconnect the iPod with the USB interface cable for iPod / iPhone. - Update the iPod software version.  An error has occurred. - Reconnect the iPod with the USB interface cable for iPod / iPhone. - Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. - Update the iPod software version.  Cables are not connected correctly. - Connect the cables correctly. Sound from the iPod cannot be heard.  The audio output direction may switch automatically when the Bluetooth and USB connections are used at the same time. - Use the iPod to change the audio output direction. Problems with the phone screen Dialing is impossible because the touch panel keys for dialing are inactive.  Your phone is out of range for service. - Retry after re-entering the range for service.  The connection between the cellular phone and this product cannot be established. - Perform the connection process. Problems with the Application screen A black screen is displayed.  While operating an application, the application was ended on the smartphone side. - Press the button to display the top menu screen.  The smartphone OS may be awaiting screen operation. - Stop the vehicle in a safe place and check the screen on the smartphone. The screen is displayed, but operation does not work at all.  An error has occurred. - Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. - When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it. The smartphone was not charged.  Charging stopped because the temperature of the smart- phone rose due to prolonged use of the smartphone during charging. - Disconnect the smartphone from the cable, and wait until the smartphone cools down.  More battery power was consumed than was gained from charging. - This problem may be resolved by stopping any unneces- sary services on the smartphone. The status of the vehicle for the forward and backward directions are reversed.  Since part of the vehicle status is sent to the connected device when you use the Android Auto function, this problem occurs when the reverse gear polarity setting of this product is incorrect. - Check the polarity and re-select the correct setting. Error messages When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. Common AMP Error  This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. - Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance. TEMP  The temperature of this product is outside the normal operat- ing range. - Wait until this product returns to a temperature within the normal operating limits. Product overheat. System will be shut down automatically in 1 minute. Restart the product by ACC-Off/On may fix this problem. If this message keeps showing up, it is possible that some problem occured in the product.  The temperature is too high for this product to operate. - Follow the instructions displayed on the screen. If this does not solve the problem, contact your dealer or an authorized Pioneer Station for assistance. Positioning is not possible due to the hardware. Please contact your dealer or Pioneer service center.  The location display is not possible due to hardware failure. - Contact your dealer or an authorized Pioneer Station for assistance. No GPS antenna. Check connection.  GPS reception is lost. - Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Station for assistance. GPS antenna problem detected. Contact dealer or service center.  GPS antenna lead is short-circuited. - Contact your dealer or an authorized Pioneer Station for assistance. Calibration will start, but may be inaccurate without speed pulse.  The speed pulse sensor is not connected correctly. - Contact your dealer or an authorized Pioneer Station for assistance. Sensor error. Please contact your dealer or Pioneer Service Center.  An error has occurred with the sensor. - Contact your dealer or an authorized Pioneer Station for assistance. Detected unusual speed pulses.  The speed pulse cannot be detected correctly. - Contact your dealer or an authorized Pioneer Station for assistance. Detected changes in the installation angle or position. The in-dash receiver is updating the sensor learning data.  Changes in the installation angle or position are detected. - Wait until the sensor learning finishes. Speed pulse wire is not connected. The system will operate in simple hybrid mode.  Speed pulse wire is not connected. - The speed pulse cannot be detected if the speed pulse wire is not connected correctly. 77