Pioneer AVIC-7200NEX Owner s Manual - Page 76
Other functions, Appendix
View all Pioneer AVIC-7200NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Other functions Appendix 4 Touch [Yes]. 5 Touch [OK]. 6 Enter the current password. 7 Touch [Go]. A message indicating that the security setting is canceled appears. Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery p Some of the settings and recorded contents will not be reset. Method 2: Restore the default settings from the "System" menu Refer to Restoring the default settings on page 76. Method 3: Press the RESET button Refer to Resetting the microprocessor on page 4 p Some of the settings and recorded contents will not be reset. Restoring the default settings CAUTION Do not turn off the engine while restoring the settings. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page 63 2 Touch [AV Source Settings]. 3 Touch [Restore Settings]. A message confirming whether to initialize the settings appears. 4 Touch the item you want to initialize. All Settings Almost all settings or recorded content returns to the default. Audio Settings p This setting is available when the source is turned off. Theme Settings Bluetooth Settings 5 Touch [Restore]. 76 Troubleshooting If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Common problems A black screen is displayed, and operation is not possible using the touch panel keys. "Power OFF" mode is on. - Press any button on this product to release the mode. The rear view camera image is displayed with no camera connection and the wrong camera polarity setting. - Press and hold the MAP button to release the rear view camera screen and then change the camera polarity setting to "Battery". Problems with the AV screen CD or DVD playback is not possible. The disc is inserted upside down. - Insert the disc with the label upward. The disc is dirty. - Clean the disc. The disc is cracked or otherwise damaged. - Insert a normal, round disc. The files on the disc are in an irregular file format. - Check the file format. The disc format cannot be played back. - Replace the disc. The loaded disc is a type this product cannot play. - Check what type of disc it is. The screen is covered by a caution message and the video cannot be shown. The parking brake lead is not connected or the parking brake is not applied. - Connect the parking brake lead correctly, and apply the parking brake. The parking brake interlock is activated. - Park your vehicle in a safe place and apply the parking brake. No video output from the connected equipment. The "AV Input" or "AUX Input" setting is incorrect. - Correct the settings. The audio or video skips. This product is not firmly secured. - Secure this product firmly. No sounds are produced. The volume level will not rise. Cables are not connected correctly. - Connect the cables correctly. The system is performing still, slow motion, or frame-by- frame playback with DVD-Video. - There is no sound during still, slow motion, or frame-by- frame playback with DVD-Video. The system is paused or performing fast reverse or forward during the disc playback. - For the media other than music CD (CD-DA), there is no sound on fast reverse or forward. The icon is displayed, and operation is impossible. The operation is not compatible with the video configuration. - The operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.) The picture stops (pauses) and this product cannot be operated. The reading of data is impossible during disc playback. - Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio. The aspect setting is incorrect for the display. - Select the appropriate setting for that image. A parental lock message is displayed and DVD playback is not possible. The parental lock is on. - Turn the parental lock off or change the level. The parental lock for DVD playback cannot be canceled. The code number is incorrect. - Input the correct code number. The DVD video is not played back with the audio/subtitle language specified in "DVD/DivX Setup". The DVD does not support the language selected in "DVD/ DivX Setup". - Playback in the selected language is not possible if the language selected in "DVD/DivX Setup" is not recorded on the disc.