Ricoh Aficio MP C3000 Troubleshooting - Page 15
When an Indicator to the Right of a Function Key is Lit - error codes
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
When an Indicator to the Right of a Function Key is Lit When an Indicator to the Right of a Function Key is Lit When an indicator to the right of a function key lights up, press the correspond- 1 ing function key. Then, follow the instructions displayed on the control panel. Problem Cause Documents and reports The paper output tray is full. do not print out. Documents and reports There is no copy paper left. do not print out. An error has occurred. The function whose indicator is lit is defective. The machine is unable to connect to the network. A network error has occurred. Solution Remove the paper from the tray. Add more paper. See p.79 "Loading Paper". Record the code number shown in the display and contact your service representative. See "When a Message displayed" of each chapter. You can use other functions normally. • Check the displayed message and take an appropriate action. See "When a Message displayed" of each chapter. • Check that the machine is correctly connected to the network, and that the machine is correctly set. See "Network Settings", General Settings Guide. • Contact the administrator. • When the function key is still lit, even if you take the measures above, contact your service representative. Note ❒ If an error occurs in the function you are using, check the message that ap- pears on the control panel, and then refer to "When a Message is Displayed" for the relevant function. Reference p.17 "Troubleshooting When Using the Copy Function". p.27 "Troubleshooting When Using the Facsimile Function". p.45 "Troubleshooting When Using the Printer Function". p.65 "Troubleshooting When Using the Scanner Function". 7