Ricoh Aficio MP C3000 Troubleshooting - Page 48
Clean them. See p.121 Maintain
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Troubleshooting When Using the Facsimile Function Problem Cause Solution Background of received images appears dirty. Images from the back of the page appear. Image density is too high. Adjust scan density. See "Image Density (Contrast)", Facsimile Reference. Printed or sent images are spotty. The ADF, exposure glass or scan- Clean them. See p.121 "Maintain- ning glass is dirty. ing Your Machine". Make sure that ink or correction fluid is dry before placing originals. 3 Received image is too When using moist, rough, or Only use recommended paper. light. processed paper, areas of print See "Copy Paper", About This may not be fully reproduced. Machine. Received image is too When D is blinking, toner is be- Add toner. See p.89 "Adding light. ginning to run out. Toner". Received image is too light. • The image density has been set too low. • The original of the transmitted fax was printed on paper that is too thin. • Increase the scanning density. See "Image Density (Contrast)", Facsimile Reference. • Ask the sender to reprint the original on thicker paper and fax it again. 40