Ricoh Aficio MP C3000 Troubleshooting - Page 63
Other Printing Problems
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Other Printing Problems Other Printing Problems This section explains likely causes of and possible solutions for problems that can occur when printing from a computer. Problem Cause Solution Print is smudges. Settings for thick • PCL 5c/6 and PostScript 3 paper have not Select [Thick] in the [Type:] list on the [Paper] tab. been made when • RPCS printing on thick Select [Thick] in the [Paper type:] list on the [Print Set- paper in the by- tings] tab. pass tray. The print on the When D is blink- Add toner. See p.89 "Adding Toner". entire page is faded. ing, toner is beginning to run 4 out. The print on the The paper is entire page is damp. faded. Use paper that has been stored in the recommended temperature and humidity condition. See "Copy Paper", About This Machine. The print on the entire page is faded. The print on the entire page is faded. Image bleeds when rubbed. The paper is unsuitable. If the [Toner saving] check box is selected in the printer driver settings, the entire page will be faded when printed. If you are using thick paper, [Paper type:] might not be set to [Thick]. Use the recommended paper. (Printing on coarse or treated paper might result in faint print image.) See "Copy Paper", About This Machine. For the RPCS printer driver, [Toner saving] is located on the [Print Quality] tab. For the PostScript 3 printer driver, see PostScript 3 Supplement. See the printer driver Help. On the printer driver's [Setup] tab, set [Paper type:] to [Thick]. See the printer driver Help. Paper is not fed from the selected tray. When you are using a Windows operating system, printer driver settings override those set using the display panel. Set the desired input tray using the printer driver. See the printer driver Help. 55