Samsung SCH-U410 User Manual - Page 33
SETTINGS & TOOLS, Tools, Voice Commands, Voice Settings, Digit Dialing, Adapt Digits, Reset - how to reset
View all Samsung SCH-U410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
VoiceSignal® Digit Dial Adaptation To access the Adapt Digits menu, follow these steps: 1. From the main screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS. 2. Press Tools, then Voice Commands. 3. Press Voice Settings, then Digit Dialing. 4. Adapt Digits is highlighted. Press or . 5. A short description of the Adapt Digits displays. 6. Read the description until you are comfortable to proceed, then press . 7. Your phone displays the first digit sequence and "Please say" plays through the speakerphone followed by the four digits appearing in the display. Wait for the beep and repeat the digits using your normal tone of voice. 8. After a moment, the phone plays back the recording and prompts "Did the recording sound ok?" If the recording was good, say "Yes." If you need to re-record, say "No." If you say "No," the phone prompts you to pronounce the digits again. Wait for the beep and then re-record. Repeat this step until you're satisfied with the recording. 9. After confirming that the recording sounds ok, repeat the recording process with the next set of digits. After ten sets of digits, the phone indicates that adaptation is complete. Reset Digit Dial Adaptation This option erases an adaptation and resets Digit Dial to its original state. 1. From the main screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS. 2. Press Tools, then Voice Commands. 3. Press Voice Settings, then Digit Dialing. 4. Highlight Reset Digits and press . The Reset Digit Adaptation screen displays requesting confirmation of reset. Note: If you have not performed the Adapt Digits function, the Reset Digits option will not be accessible. 5. Press to proceed. Digit Adaptation Reset is completed. Call Functions 30