Seiko SSG022 Owner Manual - Page 26
Setting the Preliminary Position of the Stopwatch 1/5-Second and Minute Hands
View all Seiko SSG022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English 5 After the procedures are completed, leave the watch for 20 seconds. The preliminary position adjustment mode is automatically terminated and the second hand starts moving. Confirm whether the time and date are correct after the watch resumes displaying time. In the case that the time and date are not correct, adjust the time and date. * In p r o c e d u r e s 1 t o 5, w h e n n o operation is conducted after the date numeral and second hand stop, and the watch has no movement of the date or the second hand for 20 seconds or longer, it automatically displays the time again. When it is in the middle of operation, reattempt the operation from procedure 1. 50 JOEE English ■ Setting the Preliminary Position of the Stopwatch 1/5-Second and Minute Hands The preliminary position of the stopwatch 1/5-second hand is the 0-second position, and that of the minute hand is the 0-minute position. By setting the preliminary position, the correct measured result is displayed. 1 When pulling the crown to the second click, the second hand stops at the 0-second position. 0-second position * If procedure 1 is conducted, the watch gains or loses time. Set the time in procedure 6 (set the time by receiving a radio 6 01 2 signal). * The date and stopwatch hands also stop. 51