Sony DCR PC101 Operating Instructions - Page 107

Editing Superimposing a title If you set the write-protect tab to lock You cannot superimpose or erase the title. Slide the write-protect tab to release the write protection. To use the custom title If you want to use the custom title, select in step 3. On a blank portion of the tape You cannot superimpose a title on the tape. If the tape has a blank portion in the middle of the recorded parts The title may not be displayed correctly. The titles superimposed with your camcorder •They are displayed only by DV format video equipment with index titler function. •The point you superimposed the title may be detected as an index signal when searching a recording with other video equipment. If the tape has too many index signals You may not be able to superimpose a title because the memory is full. In this case, delete data you do not need. Not to display title Set TITLE DSPL to OFF in the menu settings (p. 190). Title setting •The title color changes as follows: WHITE t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE •The title size changes as follows: SMALL y LARGE You cannot input 13 characters or more in LARGE size. •If you select the title size SMALL, you have nine choices for the title position. If you select the title size LARGE, you have eight choices for the title position. One cassette can have up to about 20 titles, if one title consists of five characters However, if the cassette memory is full with date, photo, and cassette label data, one cassette can have only up to about 11 titles with five characters each. Cassette memory capacity is as follows: - Six date data (maximum) - 12 photo data (maximum) - One cassette label (maximum) If the " FULL" mark appears The cassette memory is full. Erase any titles you do not need. 107