Sony DCR PC101 Operating Instructions - Page 47
Recording a still image on a tape – Tape Photo recording
View all Sony DCR PC101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Advanced Recording Operations Recording a still image on a tape - Tape Photo recording You can record still images such as photographs. You can record about 510 images in the SP mode and about 765 images in the LP mode on a 60-minute tape. You can also record still images on a "Memory Stick" (p. 44, 122). (1) In standby, press FN to display PAGE1. (2) Press MENU, then set PHOTO REC to TAPE in (p. 186). (3) Keep pressing PHOTO lightly until a still image appears. The CAPTURE indicator appears. Recording does not start yet. To change the still image, release PHOTO, select a still image again, and then press and hold PHOTO lightly. (4) Press PHOTO deeper. The still image displayed on the screen when you pressed PHOTO deeper is recorded for about seven seconds. The sound during those seven seconds is also recorded. The still image is displayed on the screen until the recording is completed. 3 CAPTURE 1 FN FN 4 FN Recording images with self-timer (1) Set PHOTO REC to TAPE in in the menu settings (p. 186). (2) Follow steps 1 to 3 on page 46. Notes •During tape photo recording, you cannot change the mode or setting. •When recording a still image, do not shake your camcorder. The image may fluctuate. •The tape photo recording function does not work during following operations: - Fader - Digital effect 47