Sony DCR PC101 Operating Instructions - Page 199
DISPLAY/TOUCH PANEL is pressed., Press DISPLAY/TOUCH PANEL on your camcorder or
View all Sony DCR PC101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions The melody or beep sounds for five seconds. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize (p. 209). • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. No function works though the power is on. c Disconnect the AC power adaptor from a wall outlet or remove the battery, then reconnect it in about one minute. Turn the power on. If the functions still do not work, press the RESET button using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default) (p. 14, 18, 219). When you set the POWER switch to VCR or OFF (CHARGE), if you move your camcorder, you may hear a clattering sound from inside your • This is because some functions use a linear mechanism. Your camcorder is not malfunctioning. camcorder. While charging the battery pack, the CHARGE lamp does not light up. • Charging is completed. • The battery pack is not properly installed. c Install it properly (p. 14). You cannot charge the battery pack. • The POWER switch is not set to OFF (CHARGE). c Set it to OFF (CHARGE) (p. 15). While charging the battery pack, the CHARGE lamp flashes. • The battery pack is not properly installed. c Install it properly (p. 14). • Something is wrong with the battery pack. c Please contact your Sony dealer or local authorized Sony service facility. The buttons do not appear on the touch panel. • DISPLAY/TOUCH PANEL is pressed. c Press the LCD screen lightly. c Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote Commander (p. 39). The buttons on the LCD screen do not work. c Adjust the screen (CALIBRATION) (p. 211). The indicators appear mirrorreversed in the viewfinder. Image data cannot be transferred by the USB connection. A cassette cannot be removed even if the cassette lid is open. • The mirror mode is activated. This is not a malfunction (p. 30). • The USB cable was connected before installation of the USB driver was completed. c Uninstall the incorrect USB driver and re-install the USB driver (p. 168, 171). • USBCONNECT is set to PTP when the POWER switch is set to MEMORY. c Set it to NORMAL (p. 191). • Moisture condensation has started to condense in your camcorder (p. 209). Troubleshooting 199