Sony LF-X11 User Manual - Page 47
Watching TV and videos with NetAV, To change the TV screen size, To change the streaming rate
View all Sony LF-X11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
home Base Station. Video appears shortly after the icon appears. See "Watching TV and Video" (1 page 31) for information about TV and video operations. z Tip The NETAV LED on the Base Station lights green while you are using the NetAV function. Watching TV and videos with NetAV You can change channels and adjust the volume in the same way that you do while watching at home. For details, see "Watching TV and Video" (1 page 31). Also, if you connect the supplied IR Blaster, you can control your home video equipment by using an on-screen remote control. z Tips • It may not be possible to view some kinds of copyprotected material. • When you change channels while using NetAV, it could take some time before the picture appears. To change the TV screen size You can change the TV screen size by selecting [Resize]. Each selection changes to the next size, in three steps. At the time of purchase, the Monitor is set up to display a full screen. To change the streaming rate You can adjust the streaming rate according to the bandwidth available on your network connection. This allows you to watch TV or video with the optimum quality. Normally, selecting [Auto] sets the optimal video rate in accordance with available bandwidth. When selecting a rate manually, note that a higher (larger number) rate results in higher picture quality, but a higher rate requires a larger bandwidth and video will tend to keep stopping and starting if there is insufficient bandwidth for the higher rate. 1 Select [Rate]. The rate setting window appears. 2 Select [Auto] or [Manual]. The optimum rate is set automatically when you select [Auto]. If you select [Manual], choose the rate from among 6 steps. Select a speed. [OK] Note When you switch between [Auto] and [Manual], change the rate from [1] or [6] to another rate, or change from another rate to [1] or [6] while connected, NetAV is disconnected and then reconnected automatically. NetAV [Resize] z Tip At some connection speeds, a full-screen picture may be rough. A smoother picture may be shown by selecting a smaller screen size. 3 Select [OK]. You can change the rate even while you are not using NetAV. To quit NetAV Select [End] at the bottom of the window. 47