Sony LF-X11 User Manual - Page 90
Video, Poor picture, Other
View all Sony LF-X11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Problem Cannot get cable TV channels to appear. Images from a connected device do not appear. Causes and remedies • The unit supports cable TV channels 1 to 125. If you want to watch other channels or the channel signal is scrambled, connect a cable box to the video input terminal on the Base Station. • After verifying whether [CABLE] is set to [ON], run automatic channel scan again. Poor picture Problem Double images or ghosts Snow or dim pictures Stripes and noise Causes and remedies • Connect the antenna cable (not supplied) and CATV cable securely (1 page 15). • Adjust the position, orientation, and angle of the antenna. • Check the antenna and/or cable connections. • Make sure the channel selected is currently broadcasting. • Make sure the antenna is not damaged or broken. • Make sure the TV antenna is securely connected (1 page 15). • Keep the antenna cable (not supplied) away from the power cord and other connection cables. Other Problem Cannot control external TV tuner with the on-screen remote control. Causes and remedies • Some set-top boxes (STB) cannot be controlled with the on-screen remote control when connected to the Base Station with an antenna cable (not supplied). To control these devices with the on-screen remote control, connect them to the Base Station with a video cable (1 page 16). For more details, refer to the instruction manual for your STB. • Connect the IR Blaster to the IR BLASTER port on the Base Station (1 page 13). Video Problem No picture from the connected device. Causes and remedies • Firmly attach the connection cables. Check that the connections to the red, white, yellow, and S-Video jacks are correct (1 page 16). • Non-interlace signals from computers or other equipment cannot be displayed. • Make sure the device is connected to the correct input terminal (1 page 16). • If the video of a VCR, DVD player, or other device connected to the Base Station does not appear, check that the connected device is turned on. 90