Sony LF-X11 User Manual - Page 77
Registering LocationFree Devices, Setting Up the Base Station, for Registering LocationFree - locationfree base stations lf pk1 and
View all Sony LF-X11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Registering LocationFree Devices You can register up to 4 other LocationFree devices (other LocationFree TV Monitors, or computers with LFA-PC2 LocationFree Player installed) with the Base Station. Once you register those LocationFree devices with the Base Station, you can use them to connect to the Base Station and use NetAV. Monitor Monitor Register Internet Base Station Computer with LocationFree Player installed registered automatically. For details, refer to the LF-PK1 Operating Instructions. z Tip To register a computer with the Base Station over the Internet, see [Setting Up the Base Station for Registering LocationFree TV Monitor] (below). Setting up the Base Station for Registering LocationFree TV Monitor Before you configure the following settings, you need to perform an Easy Setup (NetAV), and confirm the NetAV Check result is "Success" (1 page 45). 1 Open the [Settings] window, and then select [Base Station]. The [Base Station] window appears. z Tip Before registering a computer with the Base Station, always install the supplied LocationFree Player (LFAPC2) on the computer. For more information about how to register, select Windows Start > [All Programs] ([Programs] in Windows 2000) > [Sony LocationFree Player] > [Operating Instructions], and refer to the LFPK1 operating instructions that appear. Notes • Use of the NetAV function for purposes other than personal enjoyment is prohibited. • It is not possible to watch TV or video on the Monitor or registered LocationFree device at the same time. 2 Select [NetAV Settings]. The [NetAV Settings] window appears. Note [NetAV Settings] can be selected when the Monitor is in Home mode. 3 Select [Device Registration]. The [Device Registration] window appears. 4 Set the items in the window. Other Functions and Settings Setting Up the Base Station for Registering LocationFree Player (LFA-PC2) Put the Base Station into Setup mode. Then start LocationFree Player on a computer located on the same network as the Base Station, and connect to the Base Station from the [Base Station Selection] window. The computer will be 77 Continued