Sony PEG-TH55 CLIE Handbook (primary manual) - Page 105
Setting the Network preferences for a wireless LAN, Signal, ProfileName
View all Sony PEG-TH55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Setting the Network preferences for a wireless LAN C Signal Reception level is displayed as a percentage. (1-100%) D Mode Mode is displayed as below. Infra: Infrastructure mode Adhoc: Adhoc mode Tip The existing wireless LAN access point may not be detected due to reception conditions. Also, your CLIÉ handheld cannot detect an SSID if that SSID is set to be hidden at the wireless LAN access point side. In this case, refer to "Manually creating a connection to the wireless LAN access points" on page 107. 5 Select an access point from the list, and tap [Select]. The Wireless LAN Setup screen for a new profile is displayed. Tip If the SSID is already registered on your CLIÉ handheld, the Wireless LAN Setup screen is displayed by selecting that SSID in the profile list. 6 Configure each setting. A ProfileName : Enter any profile name you prefer. B SSID : The SSID found in step 4 is displayed. Customizing your CLIÉ™ handheld (Preferences) Continued on next page 105