Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 142
HD/SD SDI OUT connector BNC, HDMI connector, VIDEO OUT connector, i.LINK HDV/DV connector
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Chapter 8 Connecting External Devices HD/SD SDI OUT connector (BNC) The HD/SD SDI OUT connector can be used to connect a device that supports SDI. The device type can be a monitor, switcher, or VTR or other recording device. The output from this connector can be turned on and off with OPERATION >Input/Output >SDI Output in the setup menu (see page 98). For connection, use a BNC cable (not supplied). HDMI connector The HDMI connector can be used to connect a device that supports HDMI. The device type can be a monitor or VTR or other recording device. The output from this connector can be turned on and off with OPERATION >Input/Output >HDMI Output in the setup menu (see page 98). For connection, use an HDMI cable (not supplied). VIDEO OUT connector The VIDEO OUT connector can be used to connect a device that supports analog composite signal. The device type can be a monitor or VTR or other recording device. The analog composite signal output from this connector is the same as the NTSC or PAL encoded signal that is output from the HD/SD SDI OUT connector when the setting of output is SD signal (you can switch between NTSC and PAL with OPERATION >Format >Country in the setup menu (see page 96)). To input the VIDEO OUT connector output signal to an external analog composite device, it may be necessary to change the input signal setting of that external device to be matched with the analog composite signal setting for the VIDEO OUT connector. To input camcorder output audio to an external device such as a monitor or VTR or other recording device, connect the audio output of the AUDIO OUT connector to the audio input of that external device. For connection, use a BNC cable (not supplied). i.LINK (HDV/DV) connector The i.LINK (HDV/DV) connector supports HDV and DV input/output. However, DV streams cannot be recorded on this camcorder. This connector can be used to connect a device that supports i.LINK (HDV). The device type can be a monitor, read/write device such as VTR or HDD, or computer. To input/output HDV signals HDV input/output is supported when the video format is an HDV compatible format (SP 1440/ 59.94i, SP 1440/50i, or SP 1440/23.98P), Input/ Output >Output&i.LINK in the OPERATION menu is set to [HD&HDV] or [SD&HDV], and Input/Output >i.LINK I/O is set to [Enable]. When the video format is SP 1440/23.98P, a 59.94i HDV signal subjected to 2-3 pulldown processing is output. To input/output DV signals DV input/output is supported under either of the following conditions. • Input/Output >i.LINK I/O in the OPERATION menu is set to [Enable] on SD mode. • On HD mode, the video format is other than DV incompatible formats (HQ 1920/23.98P, HQ 1440/23.98P, and HQ 1280/23.98P), Input/ Output >Output&i.LINK is set to [SD&DV], and Input/Output >i.LINK I/O is set to [Enable]. 142 Connecting External Monitors