Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 31
Recording of external input, Electric color temperature filter
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 1 Overview • AF (Auto Focus mode) • MF (Manual Focus mode) • MF* (Manual Focus mode when the MF Assist function is on) • Full MF (Full Manual Focus mode) c External device control "REC2" is displayed when MAINTENANCE >Camera Config >HD-SDI Remote I/F is set to [Chara] in the setup menu and a recording control signal is output from the HD/SD SDI OUT connector. d Operation status of connected i.LINK device The operating format (HDV or DV) and operation status of that device are indicated as follows. Indication zREC STBY zREC STBY Meaning HDV recording in progress Standby for HDV recording DV recording in progress Standby for DV recording e Video level indication An indication is displayed together with an appropriate ND filter position number when the light level of the subject is too high or too low. f Timecode Caution message Indicates the elapsed recording/playback time, timecode, user bits data or other information selected by the DISPLAY switch (see page 21). Also indicates a caution message when caution is required such as when you try to change settings. g Brightness level Indicates the average brightness level (%) of the detection area. h External input source Indicates the type of external input signal (HDV) to be recorded. i Recording of external input Indicates "EXT" when an external input is recorded. j Electric color temperature filter Appears when the CC 5600K function is set to on. k Filter position Indicates the currently selected ND filter position number. (see page 16). When ELECTRICAL CC is assigned to an assignable switch, the electrical filter position (A/ B/C/D) appears to the right of the ND filter position (1 to 4), as shown on the previous page. l White balance memory Indicates the currently selected white balance automatic adjustment memory. ATW: ATW (Auto Tracing White Balance) mode W:A: Memory A mode W:B: Memory B mode W:P: Preset mode 3200: When the assignable switch to which Color Temp SW 3200K has been assigned is on 4300: When the assignable switch to which Color Temp SW 4300K has been assigned is on 5600: When the assignable switch to which Color Temp SW 5600K has been assigned is on 6300: When the assignable switch to which Color Temp SW 6300K has been assigned is on m Gain value Indicates the gain value (in dB) of the video amplifier, as set by the GAIN selector. n Shutter Indicates the shutter speed or the shutter mode. For details, see "Setting the Electronic Shutter" (page 54). o Audio level meters Indicate the audio levels of channel 1 and channel 2. p Remaining media capacity Indicates the recording time remaining for each of the media loaded in the slots. The available time for recording with the current video format (recording bit rate) is calculated according to the remaining space of each media and indicated in time units of minutes. A lock icon appears if the media is write-protected. q Histogram Shows a pixel distribution of video luminance (HD mode only). Viewfinder Screen Display 31