Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 38

Attaching a 5-inch Electronic Viewfinder, wrench, detach the viewfinder slide

Page 38 highlights

Chapter 2 Preparations 1 Loosen the front-to-back viewfinder positioning levers and the front-to-back viewfinder positioning knobs, and then pull the viewfinder slide assembly forward. 2 Using a 2.5 mm diameter hexagonal wrench, detach the viewfinder slide assembly. Bolts supplied with the BKW-401 4 Adjust the front-to-back position so that the arm of the BKW-401 does not touch the handle when it is raised. Adjust position so that arm does not touch handle Bolts with hexagonal hole Viewfinder slide assembly 3 Attach the BKW-401 with the supplied bolts. Attaching a 5-inch Electronic Viewfinder You can attach an optional DXF-51or DXF-C50W (5-inch) Electronic Viewfinder. To attach it, an Accessory Shoe Kit (service part number: A-8274-968-B) is required. For details, consult a Sony service representative. Note It is not possible to use the supplied viewfinder and a 5-inch viewfinder at the same time. Remove the cover of the grip, and attach the shoe and stopper screw of the Accessory Shoe Kit. 38 Attaching the Viewfinder

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171

Attaching the Viewfinder
38
Chapter 2
Preparations
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
3
Attach the BKW-401 with the supplied
bolts.
4
Adjust the front-to-back position so
that the arm of the BKW-401 does not
touch the handle when it is raised.
You can attach an optional DXF-51or DXF-C50W (5-inch) Electronic Viewfinder. To attach it, an
Accessory Shoe Kit (service part number: A-8274-968-B) is required.
For details, consult a Sony service representative.
Note
It is not possible to use the supplied viewfinder and a 5-inch viewfinder at the same time.
Remove the cover of the grip, and attach the shoe and stopper screw of the Accessory Shoe Kit.
Bolts with
hexagonal
hole
Viewfinder slide assembly
Bolts supplied with the BKW-401
Adjust position so that arm
does not touch handle
Attaching a 5-inch Electronic Viewfinder