Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 34
Using AC Power, To detach the battery pack
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Preparations 1 BP-GL95/GL65/L60S/L80S 2 Align these lines. 2 Slide the battery pack down until its "LOCK" arrow points at the matching line on the camcorder. Release button Notes • During recording and playback (while the ACCESS indicator is lit), be careful never to remove the battery pack. • Make sure to power the camcorder off before replacing the battery pack. Using AC Power Mount an AC-DN2B/DN10 on the camcorder in the same way as a battery pack, then connect to the AC power supply. The AC-DN2B/DN10 can supply up to 100 W of power. 1 "LOCK" arrow 2 Matching line on the camcorder Note If the battery pack is not attached correctly, the terminal may be damaged. To detach the battery pack Holding the release button in, pull the battery pack up. To an AC outlet 34 Preparing a Power Supply