Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 43
Preparing the Audio Input System, Connecting a Microphone to the MIC IN Connector
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 2 Preparations 8 Repeat steps 4 to 7 until the chart stays in focus all the way from wide angle to telephoto. 9 Tighten the F.f or F.B ring fixing screws. Preparing the Audio Input System Connecting a Microphone to the MIC IN Connector Attach the supplied microphone to the microphone holder of the supplied viewfinder. 1 Loosen the screw (1) and open the microphone holder clamp (2). Microphone holder clamp 2 Place the microphone in the microphone holder. 1 Place the microphone in the holder so that "UP" is at the top. 2 Close the microphone holder. 3 Tighten the screw. 3 Plug the microphone cable into the MIC IN connector, then set the AUDIO IN CH1/CH2/CH3/CH4 switch for the Preparing the Audio Input System 43
Preparing the Audio Input System
43
Chapter 2
Preparations
8
Repeat steps
4
to
7
until the chart stays
in focus all the way from wide angle to
telephoto.
9
Tighten the F.f or F.B ring fixing
screws.
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
1
Loosen the screw (
1
) and open the
microphone holder clamp (
2
).
2
Place the microphone in the
microphone holder.
1
Place the microphone in the holder so
that “UP” is at the top.
2
Close the microphone holder.
3
Tighten the screw.
3
Plug the microphone cable into the MIC
IN connector, then set the AUDIO IN
CH1/CH2/CH3/CH4 switch for the
Preparing the Audio
Input System
Connecting a Microphone to the
MIC IN Connector
Microphone holder clamp