Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 22
AUDIO IN CH1/CH2/CH3/CH4 audio, LEVEL CH-1/CH-2/CH-3/CH-4 audio
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 Overview For details, see "Setting the Timecode" (page 61) and "Setting the User Bits" (page 62). f LEVEL CH-1/CH-2/CH-3/CH-4 (audio channel 1/2/3/4 recording level) knobs Adjust the audio levels to be recorded on channels 1, 2, 3, and 4 when the AUDIO SELECT CH-1/ CH-2 and AUDIO SELECT CH 3-4 switches are set to MANUAL. g AUDIO SELECT CH 3-4 (audio channel 3/4 adjustment method selection) switch Select the audio level adjustment method for each of audio channels 3 and 4. AUTO: Automatic adjustment MANUAL: Manual adjustment h ESSENCE MARK button By pressing this button when the thumbnail display of a clip is on the screen, you can view the following thumbnail display of the shot-marked frames of that clip, depending on the item selected in a list displayed on the screen. Shot Mark1: Thumbnail display of the frames marked with Shot Mark 1 Shot Mark2: Thumbnail display of the frames marked with Shot Mark 2 Shot Mark: Thumbnail display of the frames marked with either Shot Mark 1 or Shot Mark 2 i SHIFT button Use this in combination with other buttons. j PRESET/REGEN (regeneration)/ CLOCK switch Selects the type of timecode to record. PRESET: Record new timecode on the media. REGEN: Record timecode continuous with the existing timecode recorded on the media. Regardless of the setting of the F-RUN/SET/ R-RUN switch, the camcorder operates in RRUN mode. CLOCK: Record timecode synchronized to the internal clock. Regardless of the setting of the F-RUN/SET/R-RUN switch, the camcorder operates in F-RUN mode. k AUDIO SELECT CH-1/CH-2 (audio channel 1/2 adjustment method selection) switches Select the audio level adjustment method for each of audio channels 1 and 2. AUTO: Automatic adjustment MANUAL: Manual adjustment l AUDIO IN CH1/CH2/CH3/CH4 (audio channel 1/2/3/4 input selection) switches Select the audio input signals to be recorded on audio channels 1, 2, 3 and 4. FRONT: Audio input signals from the microphone connected to the MIC IN connector REAR: Audio input signals from an audio device connected to the AUDIO IN CH1/CH2 connectors WIRELESS: Audio input signals from the UHF portable tuner if it is installed 22 Locations and Functions of Parts and Controls