Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 156
Appendix, Important Notes on Operation, Important Notes on, Operation
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Appendix Appendix Important Notes on Operation Use and storage Do not subject the camcorder to severe shocks • The internal mechanism may be damaged or the body warped. • If an accessory mounted on the accessory shoe is subjected to severe shock, the accessory shoe may be damaged. In such a case, stop using it and contact your dealer or a Sony service representative. Do not cover the camcorder while operating Putting a cloth, for example, over the camcorder can cause excessive internal heat build-up. After use Always turn off the POWER switch. Before storing the camcorder for a long period Remove the battery pack. Shipping • Remove the media before transporting the camcorder. • If sending the camcorder by truck, ship, air or other transportation service, pack it in the shipping carton of the camcorder. Care of the camcorder Remove dust and dirt from the surfaces of the lenses or optical filters using a blower. If the body of the camcorder is dirty, clean it with a soft, dry cloth. In extreme cases, use a cloth steeped in a little neutral detergent, then wipe dry. Do not use organic solvents such as alcohol or thinners, as these may cause discoloration or other damage to the finish of the camcorder. In the event of operating problems If you should experience problems with the camcorder, contact a Sony service representative. Use and storage locations Store in a level, ventilated place. Avoid using or storing the camcorder in the following places. • In excessive heat or cold (operating temperature range: 0°C to 40°C (32°F to 104°F)) • Remember that in summer in warm climates the temperature inside a car with the windows closed can easily exceed 50°C (122°F). • In damp or dusty locations • Locations where the camcorder may be exposed to rain • Locations subject to violent vibration • Near strong magnetic fields • Close to radio or TV transmitters producing strong electromagnetic fields. • In direct sunlight or close to heaters for extended periods To prevent electromagnetic interference from portable communications devices The use of portable telephones and other communications devices near this camcorder can result in malfunctions and interference with audio and video signals. It is recommended that the portable communications devices near this camcorder be powered off. Note on laser beams Laser beams may damage the CMOS image sensors. If you shoot a scene that includes a laser beam, be careful not to let the laser beam be directed into the lens of the camcorder. Fitting the zoom lens It is important to fit the lens correctly, as otherwise damage may result. Be sure to refer to the section "Mounting and Adjusting the Lens" (page 41). Viewfinder Do not leave the camcorder with the eyepiece pointing directly at the sun. The eyepiece lens can concentrate the sun's rays and melt the interior of the viewfinder. 156 Important Notes on Operation