Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 29
Viewfinder Screen Display, Top of viewfinder screen
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Viewfinder Screen Display The viewfinder screen displays not only the video picture but also characters and messages indicating the camcorder settings and operating status, a center marker, a safety zone marker, etc. When the menu screen is not displayed and the DISPLAY switch is set to ON, the items for which an ON setting was made with OPERATION >Super Impose in the setup menu or with related switches are displayed at the top and bottom of the screen. Caution messages are indicated for three seconds when you carry out operations to change camcorder settings. Adjustment execution messages are indicated while adjustments proceed. When adjustments are finished, messages showing the results of adjustments appear for three seconds. Not only these indications are displayed on the viewfinder screen, but a menu setting enables them to be output as video signals. All items that can be displayed on the viewfinder screen are shown below. Top of viewfinder screen a Extender settings Indicates the setting of the digital extender function (by digital extender option) of this camcorder and the setting of the lens extender. EX: The lens extender is on. 08: The lens shrinker is on. x2D: The optional digital extender function of this camcorder is on. Ex2D: The lens extender and the optional digital extender function of this camcorder are both on. b Zoom position (when the serial lens is mounted) Indicates the zoom position of the zoom lens in the range from 0 to 99. c Focus position (when the serial lens is mounted) Indicates the focus position as distance to the subject (in units of m). d Green tally Lights when the camcorder is the following states. • MAINTENANCE >Camera Config >HD-SDI Remote I/F is set to [G-Tally] in the setup menu and a recording control signal is output from the HD/SD SDI OUT connector. • When the Picture Cache mode is enabled e Media status Displays the name of the currently active media slot (A or B). f Recording mode/operation status Indicates the current recording mode/operation status as follows. Indication Meaning zREC Recording in progress STBY Standby for recording zCACHE Standby in Picture Cache mode zINT REC Recording in progress in Interval Recording mode zINT STBY Standby for next recording in Interval Recording mode INT STBY Standby in Interval Recording mode zFRM REC Recording in progress in Frame Recording mode zFRM Standby for next recording in STBY Frame Recording mode FRM STBY Standby in Frame Recording mode zS&Q REC Recording in progress in Slow & Quick Motion mode S&Q STBY Standby in Slow & Quick Motion mode zCALL Being called from a connected device BREVIEW During recording review Viewfinder Screen Display 29 Chapter 1 Overview