Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 41
Setting the Date/Time of the Internal Clock, Mounting and Adjusting the Lens
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Preparations Setting the Date/Time of Mounting and Adjusting the Internal Clock the Lens You can set or change the date and time of the internal clock. The date and time set are reflected in the timecode. For menu operations, see "Basic Setup Menu Operations" (page 93). 1 Select MAINTENANCE >Clock Set >Date/Time in the setup menu. Note Always power the camcorder off before mounting or removing a lens. For information about using the lens, refer to the operation manual for the lens. Lens mount securing rubber 2 Press the MENU knob. The Date/Time setting window appears. 3 Turn the MENU knob to display the desired value, and press the knob. The selection shifts to the next item on the right. 4 To continue the remaining settings, repeat step 3. 5 Making sure that "SET" is selected, press the MENU knob. The internal clock is set with the date and time set in steps 3 and 4. To cancel the setting Before executing step 5, push the MENU CANCEL/PRST/ESCAPE switch up to the CANCEL/PRST side. 1 Push the lens locking lever up and remove the lens mount cap from the lens mount. 2 Align the center pin on the lens with the center slot in the lens mount, and insert the lens into the mount. 3 Holding the lens in place, push the lens locking lever down to lock the lens. Caution If the lens is not firmly locked, it may come off while the camcorder is being used. This could cause a serious accident. Make sure the lens is firmly locked. It is recommended that the lens Setting the Date/Time of the Internal Clock / Mounting and Adjusting the Lens 41