Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 47
Connecting a Video Light, Using the Shoulder Strap, To attach the video light
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2 Preparations Connecting a Video Light Using the Shoulder Strap With this camcorder, you can use the Anton Bauer Ultralight 2 or equivalent video light (powered by 12 V with maximum power consumption of 50 W). • If you connect the video light to the LIGHT connector on the camcorder and set the LIGHT switch to AUTO, you can turn the light on and off automatically as you start and stop recording on this camcorder. • The output of the LIGHT connector on the camcorder is controlled to 12 V even when the camcorder is supplied with over 12 V power (through the DC IN connector or battery pack). The brightness or color temperature of the light will not change according to voltage increase. Notes • Do not use a video light with power consumption of over 50 W. • The brightness or color temperature of the light will change when the voltage (supplied through the DC IN connector or from the battery pack) is under 12 V. To attach the video light Fit the video light to the accessory fitting shoe on the camcorder grip, and connect the video light cable to the LIGHT connector. Note The accessory fitting shoe on the camcorder is of the 1/4-inch tapped hole type. If you want to replace this with a slide-type shoe, use the supplied cold shoe kit. On how to fit the cold shoe kit, refer to "Using a External Hard Disk" in the Supplement supplied in the CD-ROM (labeled "Manuals for Solid-State Memory Camcorder"). To attach the shoulder strap 1 Fit one of the clips to a shoulder strap fitting. Pull up the strap to lock the fitting. Clip 2 Fit the other clip to the shoulder strap fitting on the other side of the grip in the same way as in step 1. Connecting a Video Light / Using the Shoulder Strap 47