Sony PMW320K Product Manual (PMW320 Operating Instruction) - Page 35
Attaching the Viewfinder, Adjusting the Viewfinder Position
View all Sony PMW320K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Preparations Attaching the Viewfinder 2 Couple the viewfinder connector to the VF connector (rectangular). VF connector (rectangular) CAUTION When the viewfinder is attached, do not leave the camcorder with the eyepiece facing the sun. Direct sunlight can enter through the eyepiece, be focused in the viewfinder and cause fire. Attaching the Supplied Viewfinder Note When attaching the viewfinder, make notes of the following points. • Be sure to power off the camcorder before coupling the viewfinder connector to the camcorder's VF connector (rectangular). If you make this connection when the camcorder power is on, the viewfinder may not function properly. • Couple the viewfinder connector firmly to the camcorder's VF connector (rectangular). If the coupling is loose, noise may appear on the video or the tally indicator may not operate properly. 1 1 Loosen the viewfinder left-to-right positioning ring, 2 attach the viewfinder to the viewfinder fitting shoe, and 3 tighten the viewfinder leftto-right positioning ring. Stopper Viewfinder leftto-right positioning ring Detaching the viewfinder You can detach the viewfinder by following the attaching procedure in reverse order, but there is an additional action to take: when detaching the viewfinder from the fitting shoe, pull up the stopper. Adjusting the Viewfinder Position To adjust the viewfinder left-to-right position, loosen the left-to-right positioning ring, and to adjust the front-to-back position, loosen the frontto-back positioning knob. Viewfinder left-to-right positioning ring Viewfinder front-to-back positioning knob Attaching the Viewfinder 35