Sony SRR1000 Product Brochure (SRMASTER: SRR1000 Operation Manual) - Page 33

Recording This section describes the example of recording input signals from port A to the SRMemory card in slot M1. already being used for recording in step 3 of the procedure above. Note When multiple SRMemory cards, input and output ports are used to record or play back files simultaneously, some functions are limited depending on the SRMemory card type used or the port configuration. For details, see "Restrictions on Simultaneous Recording and Playback" (page 55). Chapter 4 Basic Operations 1 Insert the SRMemory card in slot M1. The slot indicator lights up blue. 2 Select port A with the corresponding PORT SELECT button. The PORT SELECT button of port A lights up and a border appears around port A in the four-port display screen. The video of the input signal from port A is displayed in the preview area in the screen. 3 Select M1 with the corresponding memory selection button. A list of files in the SRMemory card appears in the screen. 4 Press the PLAY button while holding down the REC button. The input signal from port A is recorded to the SRMemory card. During recording, "z" is displayed in the port A area in the screen. Also, the indicator below the PORT SELECT button and the indicator for the SRMemory slot are lit red. (If the SRMemory card is played back at the same time, the indicator turns amber.) 5 Press the STOP button when you want to stop recording. Recording simultaneously to one SRMemory card The input signal from another port can be simultaneously recorded to the SRMemory card during recording. To record simultaneously, select the SRMemory card that is 33 Recording