Sony SRR1000 Product Brochure (SRMASTER: SRR1000 Operation Manual) - Page 49
SETUP Menu, Vlock, Peak0, Button, Indication, Setting, Target, Capacity, Ratio
View all Sony SRR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 5 Menu Items Button Indication ALT/[F5] A/E IN ALT/ [F10] [F1] AUDIO SETTING SCALE [F10] EXIT Setting Target Selects whether to pass the signals input to the DIGITAL AUDIO INPUT (AES/EBU) In connector through the sampling rate converter. Auto: Passes the input signals through the sampling rate converter. In this case, there are no limitations on input signals. Vlock: Does not pass the input signals through the sampling rate converter. In this case, the input signals need to be locked to video signals at 48 kHz. Noise will occur if this condition is not met. Sets other settings. I/O Sets the mode for displaying digital audio levels. I/O Peak0: Displays minus audio levels with the maximum level set to 0 dB. Ref0: Displays plus/minus audio levels with the reference level set to 0 dB. Redisplays the previous menu. - SETUP Menu Button Indication Setting Target [F1] USER BANK Saves or recalls menu settings. (see page 42) Unit [F1] SYSTEM RECALL Recalls overall unit settings from the user banks. Unit [F2] PB PORT RECALL Recalls output port settings from the user banks. Out [F3] REC PORT Recalls input port settings from the user banks. In RECALL [F4] SYSTEM SAVE Stores overall unit settings in the user banks. Unit [F5] PB PORT SAVE Stores output port settings in the user banks. Out [F6] REC PORT SAVE Stores input port settings in the user banks. In [F10] EXIT Redisplays the previous menu. - [F2] PANEL SETTING Sets the settings for panel operation. Unit [F1] BEEP KEY Turns on or off the click sound emitted during panel operation. Unit On Off [F2] BEEP ALARM Turns on or off the alarm sound when an error occurs. Unit On Off [F3] REF ALRM Sets whether to display a warning when the video/audio reference signal selected in Unit REF SEL is not present or not in sync with the video input signal. On Off [F7] DISPLAY SETTING Sets the settings for the display. Unit [F1] DIMMER Adjusts the brightness of the display backlight. Unit 1 to 3 to 5 [F3] WARN Sets whether to popup warning messages. Unit Off On [F6] RESIDUAL Sets what to display in the remaining amount indication for the SRMemory card. Unit Time: Displays the remaining recording time. Capacity: Displays the remaining amount of memory. Ratio: Displays the remaining amount as a ratio. [F10] EXIT Redisplays the previous menu. - [F10] EXIT Redisplays the previous menu. - 49 Detailed Menu Description