Sony SRR1000 Product Brochure (SRMASTER: SRR1000 Operation Manual) - Page 43

Detailed Menu Description, HOME Menu

Get Sony SRR1000 PDF manuals and user guides View all Sony SRR1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Detailed Menu Description HOME Menu The HOME menu allows you to set the basic operation modes for recording and playback. Settings in the Setting column are the values that appear in the menu display section of the screen. Underlined values are the factory default settings. The Target column displays the following data. Unit: Settings for the overall unit In: Settings for the input ports Out: Settings for the output ports I/O: Settings for the input/output ports Button Indication [F2] FREEZE [F3] REF SEL [F4] EXT REF [F5] MON(L) [F6] MON(R) [F8] 9Pin ALT/[F8] PREROLL ALT/[F9] REC INH1 Setting Target Outputs a still picture (the picture that was playing just before the button was Out pressed). Select the field or frame that specifies the still picture with the ALT/[F2] (FRZ MODE) buttons in the SETUP menu. (see page 36) Selects the signal to be the reference for operation of the unit. Unit Ext: Forces the reference signal to be external. Input A, Input B, Input C, and Input D: Uses the signal from the HD SDI INPUT connector of ports A to D as the reference signal. Sets whether the reference signal is an HD signal or SD signal when using an Unit external reference signal. HD SD Selects the audio channel output from the MONITOR OUTPUT L connector. (see I/O page 38) After pressing the button, use the channel selection buttons to select channels 1 to 16. Selects the audio channel output from the MONITOR OUTPUT R connector. (see I/O page 38) After pressing the button, use the channel selection buttons to select channels 1 to 16. Turn this On to enable the unit to be controlled from a device connected to a I/O REMOTE connector. On Off Sets the preroll time. This can be set in 1 second increments. Unit To make the setting, press the ALT/[F8] buttons, use the cursor buttons or MULTI CONTROL knob to set the value, and then press the ALT/[F8] buttons again. 0 to 5 sec to 30 sec Sets record inhibit mode. Unit Off: Enables recording. All: Prohibits all recording. Chapter 5 Menu Items 43 Detailed Menu Description

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
43
Detailed Menu Description
Chapter 5
Menu Items
Detailed Menu Description
HOME Menu
The HOME menu allows you to set the basic operation
modes for recording and playback.
Settings in the Setting column are the values that appear in
the menu display section of the screen. Underlined values
are the factory default settings.
The Target column displays the following data.
Unit:
Settings for the overall unit
In:
Settings for the input ports
Out:
Settings for the output ports
I/O:
Settings for the input/output ports
Button
Indication
Setting
Target
[F2]
FREEZE
Outputs a still picture (the picture that was playing just before the button was
pressed). Select the field or frame that specifies the still picture with the ALT/
[F2]
(FRZ MODE) buttons in the SETUP menu.
(see page 36)
Out
[F3]
REF SEL
Selects the signal to be the reference for operation of the unit.
Ext
:
Forces the reference signal to be external.
Input A, Input B, Input C, and Input D:
Uses the signal from the HD SDI INPUT
connector of ports A to D as the reference signal.
Unit
[F4]
EXT REF
Sets whether the reference signal is an HD signal or SD signal when using an
external reference signal.
HD
SD
Unit
[F5]
MON(L)
Selects the audio channel output from the MONITOR OUTPUT L connector.
(see
page 38)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
I/O
[F6]
MON(R)
Selects the audio channel output from the MONITOR OUTPUT R connector.
(see
page 38)
After pressing the button, use the channel selection buttons to select channels 1 to
16.
I/O
[F8]
9Pin
Turn this On to enable the unit to be controlled from a device connected to a
REMOTE connector.
On
Off
I/O
ALT/
[F8]
PREROLL
Sets the preroll time. This can be set in 1 second increments.
To make the setting, press the ALT/
[F8]
buttons, use the cursor buttons or MULTI
CONTROL knob to set the value, and then press the ALT/
[F8]
buttons again.
0 to 5 sec
to 30 sec
Unit
ALT/
[F9]
REC INH1
Sets record inhibit mode.
Off
:
Enables recording.
All:
Prohibits all recording.
Unit