Sony SRR1000 Product Brochure (SRMASTER: SRR1000 Operation Manual) - Page 58

Error Messages When the unit ceases to operate correctly due to a malfunction or internal system error, the alarm will sound and an error message will appear on the display. After an error message is displayed, eliminate the cause of the error based on the error message and then turn the unit back on. If the error message appears again when the unit is turned on, contact your Sony representative. Appendix Code 1) 14xx00 14xxpp 260100 2701ss 2801ss 2901ss 960100 A2zz00 A90100 B3xx00 B3xxpp B4xx00 B4xxpp B4xxss B8zz00 B9zz00 BAzz00 D1xxpp D2xxpp D3xxss D4xxss Indication PS FAN1 TROUBLE, etc. POWER SUPPLY UNIT TROUBLE SLOT Mx EJECT ERROR SLOT Mx EXIST ERROR SLOT Mx EJECT MOTOR LOCK CALENDAR CLOCK ERROR SYS1 FRAM CHECKSUM ERROR, etc. SY-350 OVER CURRENT ERROR SY CPLD2 INITIAL ERROR, etc. POWER SUPPLY TEMPERATURE HIGH, etc. Meaning A malfunction of cooling fan motor was detected. For details, see the Maintenance Manual. A power failure was detected. Pressing the Eject button failed to eject an SRMemory card from the indicated slot. When the slot indicator is off, forcibly ejecting an SRMemory card will not damage recorded data. The SRMemory card in the indicated slot could not be detected even though the Eject button had not been pressed. A malfunction of eject motor was detected at the indicated slot. When the slot indicator is off, forcibly ejecting an SRMemory card will not damage recorded data. An internal calendar clock error was detected. An error was detected in FRAM used by SYS1. For details, see the Maintenance Manual. An over current was detected in the DC-DC converter on the SY-350 board. For details, see the Maintenance Manual. An error was detected at the device initialization stage. For details, see the Maintenance Manual. Temperature sensor has detected an error. For details, see the Maintenance Manual. SYS1-SYS2 NO COMMUNICATION ERROR, etc. CP-SYS1 NO COMMUNICATION ERROR, etc. KY-CP NO COMMUNICATION ERROR, etc. PORT x ENC DMA1 ERROR, etc. PORT x DEC DMA1 ERROR, etc. SLOT Mx AV WRITE ERROR1, etc. SLOT Mx AV READ ERROR1, etc. SYS1 CPU has detected a communication error between CPUs (SYS1, SYS2, CP). For details, see the Maintenance Manual. CP CPU has detected a communication error between CPUs (SYS1, CP, KP). For details, see the Maintenance Manual. KY CPU has detected a communication error between CPUs (CP, KY). For details, see the Maintenance Manual. An error was detected during recording via the indicated port. For details, see the Maintenance Manual. An error was detected during playback via the indicated port. For details, see the Maintenance Manual. An error occurred while writing to the SRMemory card in the indicated slot. For details, see the Maintenance Manual. An error occurred while reading from the SRMemory card in the indicated slot. For details, see the Maintenance Manual. 58 Troubleshooting