Sony SRR1000 Product Brochure (SRMASTER: SRR1000 Operation Manual) - Page 45

Button Indication ALT/[F5] TC2 SEL ALT/[F7] CHAR SET [F1] POSITION [F2] SIZE [F3] INFO SEL [F4] TYPE [F6] WARNING [F10] ALT/[F9] [F1] [F2] [F3] EXIT META SET LINE1 LINE2 LINE3 [F10] ALT/ [F10] EXIT CHAR ON Setting Target Sets whether to use two lines for the time code display section and selects the time I/O code type for 2nd line when the screen is one-port display. For input ports: Off TCG TM1 TM2 UBG For output ports: Off LTC VITC TM1 TM2 UBR UBV Sets the time code and other character information to superimpose on the signal Out output from the MONITOR connector of SD/HD SDI. (see page 29) Allows you to set the display position of character information with the cursor Out buttons. Sets the display size of character information. Out Small Medium Sets the character information content for when ALT/[F10] (CHAR ON) is set to On. Out Time (Timedata Only): Timer counter display information only T&V (Timedata & VITC): Timer counter display information and VITC T&T1 (Timedata & TM1): Timer counter display information and TM1 T&T2 (Timedata & TM2): Timer counter display information and TM2 T&UB (Timedata & UBIT): Timer counter display information and user bits T&sta (Timedata & Status): Timer counter display information and operation status Sets the background of character information. Out Outl (Outline): White characters with black outlines Trnsl (Translucent): White characters on a gray screen background Wo/BG (Without BG): White characters with no background W/BG (With BG): White characters on a black background Sets whether to display a flashing warning message on the second line when an Unit item other than "Time" is selected with [F3] (INFO SEL). Off On Redisplays the previous menu. - Sets uncompressed metadata. I/O Sets from which lines to acquire the uncompressed metadata. In In 1080 59.94i, 1080 50i, 23.98P/24P mode: 9H to 16H or 18H to 20H In 720 59.94i/59.94P/29.97P, 720 50i/25P mode: 9H to 16H or 18H to 25H Redisplays the previous menu. - Sets whether to superimpose the characters representing the time data and Out operation status on the signal output from the SD/HD SDI MONITOR connector. (see page 29) Off On Chapter 5 Menu Items 45 Detailed Menu Description