TP-Link TL-SG2424P TL-SG2424P V1 User Guide 1910010774 - Page 103
Multicast Filter
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
VLAN ID: Forward Port: Enter the VLAN ID of the multicast IP. Enter the forward port of the multicast group. Search Option Search Option: Select the rules for displaying multicast IP table to find the desired entries quickly. All: Displays all static multicast IP entries. Multicast IP: Enter the multicast IP address the desired entry must carry. VLAN ID: Enter the VLAN ID the desired entry must carry. Port: Enter the port number the desired entry must carry. Static Multicast IP Table Select: Multicast IP: VLAN ID: Forward Port: Select the desired entry to delete the corresponding static multicast IP. It is multi-optional. Displays the multicast IP. Displays the VLAN ID of the multicast group. Displays the forward port of the multicast group. 8.3 Multicast Filter When IGMP Snooping is enabled, you can specified the multicast IP-range the ports can join so as to restrict users ordering multicast programs via configuring multicast filter rules. When applying for a multicast group, the host will send IGMP report message. After receiving the report message, the switch will firstly check the multicast filter rules configured for the receiving port. If the port can be added to the multicast group, it will be added to the multicast address table; if the port cannot be added to the multicast group, the switch will drop the IGMP report message. In that way, the multicast streams will not be transmitted to this port, which allows you to control hosts joining the multicast group. 8.3.1 IP-Range On this page you can figure the desired IP-ranges to be filtered. Choose the menu Multicast→Multicast Filter→IP-Range to load the following page. 95