TP-Link TL-SG2424P TL-SG2424P V1 User Guide 1910010774 - Page 99
Multicast VLAN, 1Q VLAN, Operation, Description, Multicast, Snooping, Snooping Config, Port Config,
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Multicast VLAN Multicast VLAN: VLAN ID: Router Port Time: Member Port Time: Leave Time: Router Ports: Select Enable/Disable Multicast VLAN feature. Enter the VLAN ID of the multicast VLAN. Specify the aging time of the router port. Within this time, if the switch doesn't receive IGMP query message from the router port, it will consider this port is not a router port any more. Specify the aging time of the member port. Within this time, if the switch doesn't receive IGMP report message from the member port, it will consider this port is not a member port any more. Specify the interval between the switch receiving a leave message from a host, and the switch removing the host from the multicast groups. Select the static router port which is mainly used in the network with stable topology. Note: 1. The router port should be in the multicast VLAN, otherwise the member ports cannot receive multicast streams. 2. The Multicast VLAN won't take effect unless you first complete the configuration for the corresponding VLAN owning the port on the 802.1Q VLAN page. 3. The link type of the member ports in the multicast VLAN can only be GENERAL. 4. Configure the link type of the router port in the multicast VLAN as TRUNK or configure the egress rule as TAG and the link type as GENERAL otherwise all the member ports in the multicast VLAN cannot receive multicast streams. 5. After a multicast VLAN is created, all the IGMP packets will be processed only within the multicast VLAN. Configuration procedure: Step Operation Description 1 Enable IGMP Snooping Required. Enable IGMP Snooping globally on the switch function and for the port on Multicast→IGMP Snooping→Snooping Config and Port Config page. 2 Create a multicast VLAN Required. Create a multicast VLAN and add all the member ports and router ports to the VLAN on the VLAN→802.1Q VLAN page. Configure the link type of the member ports as GENERAL. Configure the link type of the router ports as TRUNK or configure the egress rule as tagged GENERAL. 3 Configure parameters for Optional. Enable and configure a multicast VLAN on the multicast VLAN Multicast→IGMP Snooping→Multicast VLAN page. It is recommended to keep the default time parameters. 91