ZyXEL P-2602HW-D3A User Guide - Page 148

P-2602H(W)(L)-DxA Series User's Guide Table 49 Port Forwarding LABEL Modify Apply Cancel DESCRIPTION Click the edit icon to go to the screen where you can edit the port forwarding rule. Click the delete icon to delete an existing port forwarding rule. Note that subsequent address mapping rules move up by one when you take this action. Click Apply to save your changes back to the ZyXEL Device. Click Cancel to return to the previous configuration. 10.5.1 Port Forwarding Rule Edit To edit a port forwarding rule, click the rule's edit icon in the Port Forwarding screen to display the screen shown next. Figure 82 Port Forwarding Rule Setup The following table describes the fields in this screen. Table 50 Port Forwarding Rule Setup LABEL Active Service Name Start Port End Port Server IP Address Back DESCRIPTION Click this check box to enable the rule. Enter a name to identify this port-forwarding rule. Enter a port number in this field. To forward only one port, enter the port number again in the End Port field. To forward a series of ports, enter the start port number here and the end port number in the End Port field. Enter a port number in this field. To forward only one port, enter the port number again in the Start Port field above and then enter it again in this field. To forward a series of ports, enter the last port number in a series that begins with the port number in the Start Port field above. Enter the inside IP address of the server here. Click Back to return to the previous screen. 148 Chapter 10 Network Address Translation (NAT) Screens