ZyXEL P-2602HW-D3A User Guide - Page 262
Bandwidth Monitor
View all ZyXEL P-2602HW-D3A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
P-2602H(W)(L)-DxA Series User's Guide Table 103 Bandwidth Management Rule Configuration (continued) LABEL Source Subnet Netmask Source Port Protocol Back Apply Cancel DESCRIPTION Enter the destination subnet mask. This field is N/A if you do not specify a Source Address. Refer to the appendix for more information on IP subnetting. A blank source port means any source port number. Enter the port number of the source. See Appendix 31 on page 371 for some common services and port numbers. Select the protocol (TCP or UDP) or select User defined and enter the protocol (service type) number. 0 means any protocol number. Click Back to go to the previous screen. Click Apply to save your changes back to the ZyXEL Device. Click Cancel to begin configuring this screen afresh. 19.9 Bandwidth Monitor To view the ZyXEL Device's bandwidth usage, click Advanced > Bandwidth MGMT > Monitor. The screen appears as shown. Select an interface from the drop-down list box to view the bandwidth usage of its bandwidth rules. The gray section of the bar represents the percentage of unused bandwidth and the blue color represents the percentage of bandwidth in use. Figure 139 Bandwidth Management: Monitor 262 Chapter 19 Bandwidth Management