ZyXEL P-2602HW-D3A User Guide - Page 176

P-2602H(W)(L)-DxA Series User's Guide Table 64 Phone Book > Incoming Call Policy LABEL Advanced Setup # Activate Incoming Call Number Forward to Number Condition Apply Cancel DESCRIPTION The ZyXEL Device checks these rules before it checks the rules in the Forward to Number section. This field is a sequential value, and it is not associated with a specific rule. The sequence is important, however. The ZyXEL Device checks each rule in order, and it only follows the first one that applies. Select this to enable this rule. Clear this to disable this rule. Enter the phone number to which this rule applies. Enter the phone number to which you want to forward incoming calls from the Incoming Call Number. You may leave this field blank, depending on the Condition. Select the situations in which you want to forward incoming calls from the Incoming Call Number, or select an alternative action. Unconditional - The ZyXEL Device immediately forwards any calls from the Incoming Call Number to the Forward to Number. Busy - The ZyXEL Device forwards any calls from the Incoming Call Number to the Forward to Number when your SIP account already has a call connected. No Answer - The ZyXEL Device forwards any calls from the Incoming Call Number to the Forward to Number when the call is unanswered. (See No Answer Waiting Time.) Block - The ZyXEL Device rejects calls from the Incoming Call Number. Accept - The ZyXEL Device allows calls from the Incoming Call Number. You might create a rule with this condition if you do not want incoming calls from someone to be forwarded by rules in the Forward to Number section. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. 11.20 PSTN Line Screen ("L" models only) Use this screen to set up the PSTN line you use to make regular phone calls. To access this screen, click VoIP > PSTN Line > General. 176 Chapter 11 Voice