ZyXEL P-2602HW-D3A User Guide - Page 165

P-2602H(W)(L)-DxA Series User's Guide 11.13 Analog Phone Screen Use this screen to control which SIP accounts and PSTN line each phone uses. To access this screen, click VoIP > Phone > Analog Phone. Figure 91 Phone > Analog Phone Each field is described in the following table. Table 57 Phone > Analog Phone LABEL DESCRIPTION Phone Port Settings Select the phone port you want to see in this screen. If you change this field, the screen automatically refreshes. Outgoing Call Use SIP1 Select this if you want this phone port to use the SIP1 account when it makes calls. If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first. SIP2 Incoming Call apply to SIP1 SIP2 PSTN Line ("L" models only) Select this if you want this phone port to use the SIP2 account when it makes calls. If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first. Select this if you want to receive phone calls for the SIP1 account on this phone port. If you select more than one source for incoming calls, there is no way to distinguish between them when you receive phone calls. Select this if you want to receive phone calls for the SIP2 account on this phone port. If you select more than one source for incoming calls, there is no way to distinguish between them when you receive phone calls. Select this if you want to receive phone calls from the PSTN line (that do not use the Internet) on this phone port. If you select more than one source for incoming calls, there is no way to distinguish between them when you receive phone calls. Note: When the ZyXEL Device does not have power, regardless of the settings you configure, only the phone connected to the PHONE 1 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls. Chapter 11 Voice 165