ZyXEL P-660H-T1 v2 User Guide - Page 152
Static Route Edit
View all ZyXEL P-660H-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Chapter 11 Static Route Figure 79 Static Route The following table describes the labels in this screen. Table 49 Static Route LABEL DESCRIPTION # This is the number of an individual static route. Active Select the check box to activate this static route. Otherwise, clear the check box. Name This is the name that describes or identifies this route. Destination This parameter specifies the IP network address of the final destination. Routing is always based on network number. Gateway This is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. Subnet Mask This is the IP subnet mask. Modify Click the Edit icon to go to the screen where you can set up a static route on the ZyXEL Device. Click the Delete icon to remove a static route from the ZyXEL Device. A window displays asking you to confirm that you want to delete the route. 11.2.1 Static Route Edit Select a static route index number and click Edit ( ). The screen shown next appears. Use this screen to configure the required information for a static route. 152 P-660H-Tx v2 User's Guide