ZyXEL P-660H-T1 v2 User Guide - Page 40
Resetting the ZyXEL Device, Navigating the Web Configurator - password default
View all ZyXEL P-660H-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 2 Introducing the Web Configurator " The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the ZyXEL Device if this happens. 2.3 Resetting the ZyXEL Device If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the ZyXEL Device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to "1234". 2.3.1 Using the Reset Button 1 Make sure the POWER LED is on (not blinking). 2 Press the RESET button for ten seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been restored and the ZyXEL Device restarts. 2.4 Navigating the Web Configurator 2.4.1 Navigation Panel After you enter the admin password, use the sub-menus on the navigation panel to configure ZyXEL Device features. The following table describes the sub-menus. 40 P-660H-Tx v2 User's Guide