ZyXEL P-660H-T1 v2 User Guide - Page 92
Table 22, Table 23
View all ZyXEL P-660H-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Chapter 6 LAN Setup Table 22 Advanced LAN Setup (continued) LABEL DESCRIPTION Apply Click Apply to save the changes. Cancel Click Cancel to begin configuring this screen afresh. 6.4 DHCP Setup Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP client devices on the LAN. Figure 46 DHCP Setup The following table describes the labels in this screen. Table 23 DHCP Setup LABEL DESCRIPTION DHCP Setup DHCP If set to Server, your ZyXEL Device can assign IP addresses, an IP default gateway and DNS servers to Windows 95, Windows NT and other systems that support the DHCP client. If set to None, the DHCP server will be disabled. If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays DHCP requests and responses between the remote server and the clients. Enter the IP address of the actual, remote DHCP server in the Remote DHCP Server field in this case. When DHCP is used, the following items need to be set: IP Pool Starting Address This field specifies the first of the contiguous addresses in the IP address pool. Pool Size This field specifies the size, or count of the IP address pool. Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP address of the actual remote DHCP server here. DNS Server 92 P-660H-Tx v2 User's Guide