ZyXEL P-660H-T1 v2 User Guide - Page 74
Configuring Advanced Internet Connection Setup
View all ZyXEL P-660H-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 5 WAN Setup Table 15 Internet Connection (continued) LABEL DESCRIPTION Virtual Circuit ID VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. Refer to the appendix for more information. VPI The valid range for the VPI is 0 to 255. Enter the VPI assigned to you. VCI The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM traffic). Enter the VCI assigned to you. IP Address This option is available if you select Routing in the Mode field. A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. If you use the encapsulation type except RFC 1483, select Obtain an IP Address Automatically when you have a dynamic IP address; otherwise select Static IP Address and type your ISP assigned IP address in the IP Address field below. If you use RFC 1483, enter the IP address given by your ISP in the IP Address field. Subnet Mask Enter a subnet mask in dotted decimal notation. (ENET ENCAP Refer to the appendices to calculate a subnet mask If you are implementing encapsulation only) subnetting. Gateway IP address You must specify a gateway IP address (supplied by your ISP) when you select (ENET ENCAP ENET ENCAP in the Encapsulation field encapsulation only) Connection (PPPoA and PPPoE encapsulation only) Nailed-Up Connection Select Nailed-Up Connection when you want your connection up all the time. The ZyXEL Device will try to bring up the connection automatically if it is disconnected. Connect on Demand Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out in the Max Idle Timeout field. Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect on Demand. The default setting is 0, which means the Internet session will not timeout. Apply Click Apply to save the changes. Cancel Click Cancel to begin configuring this screen afresh. Advanced Setup Click this button to display the Advanced Internet Connection Setup screen and edit more details of your WAN setup. 5.5.1 Configuring Advanced Internet Connection Setup To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in the Internet Connection screen. The screen appears as shown. 74 P-660H-Tx v2 User's Guide