Adaptec 2020ZCR Reference Guide - Page 137

container Commands Table 3-7 Values for Write Cache Status (Continued) Value Active, not protected, battery reconditioning Active, protected Inactive, battery low Inactive, battery not present Inactive, battery reconditioning Meaning The status of the write cache for this array is as follows: I Active - The write cache can accept write oper- ations from the array. I Not protected - The write cache is force- enabled. Thus, the write cache accepts write operations even if write data could be lost due to no battery present or a bad battery on the controller. I This status also indicates that the battery is being reconditioned. The status of the write cache for this array is as follows: I Active - The write cache can accept write oper- ations from the array. I Protected - The write cache is enabled only if a battery is present and its status is OK. I This status also indicates that the controller's battery is present and its status is OK. The status of the write cache for this array is as follows: I Inactive - The write cache cannot accept write operations from the array. I Battery low - This controller's battery power is low. The status of the write cache for this array is as follows: I Inactive - The write cache cannot accept write operations from the array. I Battery not present - This controller has no battery. The status of the write cache for this array is as follows: I Inactive - The write cache cannot accept write operations from the array. I Battery low - The controller's battery is being reconditioned. 3-106