Adaptec 2020ZCR Reference Guide - Page 265

enclosure Commands enclosure show slot To display the status of a specific device slot on a specific SAF-TE enclosure management device, use the enclosure show slot command. You can also use this command to display the status of all device slots on the enclosure management device or devices. Syntax enclosure show slot [{enclosure}] [{slot}] Parameters {enclosure} Specifies the ID associated with the enclosure management device for which you want to display device slot status information. For this version, the controller supports a maximum of eight enclosure management devices on each bus. If you do not specify an ID, the command displays the device slot status for all enclosure management devices connected to the controller. {slot} Specifies the unit number associated with the device slot whose status you want to display. This integer can range from 0 to 15 inclusive. Typically, the slot unit number is limited by the physical number of device slots in the enclosure management device. If you do not specify a unit number, the command displays the status for all device slots on the enclosure management device or devices. 9-32