Adaptec 2020ZCR Reference Guide - Page 21

Introduction Value MMR MSC NTF R5R R5S RCF SCV SCZ SVR Table 1-7 Function Values (Continued) Meaning Merge a broken mirror task. The array merge command causes the MMR value to display. array scrub task. The array scrub command causes the MSC value to display. array format task with an NTFS file system specified. The array format command with the /file_system switch set to NTFS causes the NTF value to display. RAID-5 rebuild task. RAID 5 array create task with the scrub method specified. The array create raid5 command with the /scrub switch specified causes the R5S value to display. array reconfigure task. The array reconfigure command causes the RCF value to display. Verify all blocks on a SCSI disk device task. The disk verify command causes the SCV value to display. Clear an entire SCSI disk task. The disk zero command causes the SCZ value to display. Verify all blocks and repair bad blocks on a SCSI disk device task. The disk verify command with the /repair switch causes the SVR value to display. The Ctr and State Items The Ctr item displays the ID number of the array associated with the task. In the example, the array's ID is 0 (zero). The State item displays the state of the task along with a running percentage value that indicates the progress of the currently running task. The item shows the percentage in tenths of a percent increments. The currently running task is complete when the State item displays 100%. 1-14