Adaptec 2020ZCR Reference Guide - Page 235
enclosure activate slot
UPC - 760884151136
View all Adaptec 2020ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
enclosure Commands enclosure activate slot To activate a device in a specified slot of the specified SAF-TE enclosure management device, use the enclosure activate slot command. Specifically, this command makes the device that resides in the slot available on the SCSI channel. Syntax enclosure activate slot {enclosure} {slot} Parameters {enclosure} Specifies the ID associated with the enclosure management device on which you want to activate a device. For this version, the controller supports a maximum of eight enclosure management devices on each bus. {slot} Specifies the unit number associated with the slot. This is the slot that contains the device you want to activate. This unit number can range from 0 to 15 inclusive. Typically, the slot unit number is limited by the physical number of device slots in the enclosure management device. Examples Before activating a device, you might want to use the enclosure show slot command to determine the current device state. As the following example shows, the current device state setting is NOTACTIVATE: AAC0>enclosure show slot 0 Executing: enclosure show slot 0 Enclosure Slot scsiId Insert Status 0 0 0:00:0 4 OK UNCONFIG NOTACTIVATE 0 1 0:01:0 0 OK UNCONFIG ACTIVATE 0 2 0:10:0 0 OK UNCONFIG ACTIVATE 0 3 0:03:0 0 OK UNCONFIG ACTIVATE 0 4 0:04:0 0 OK UNCONFIG ACTIVATE 1 0 1:00:0 0 OK CONFIG ACTIVATE 1 1 1:01:0 0 OK UNCONFIG ACTIVATE 1 2 1:10:0 0 OK UNCONFIG ACTIVATE 1 3 1:03:0 0 OK UNCONFIG ACTIVATE 1 4 1:04:0 0 OK UNCONFIG ACTIVATE 9-2