Adaptec 2020ZCR Reference Guide - Page 269

enclosure Commands enclosure show status To display the general status of a specific SAF-TE enclosure management device, use the enclosure show status command. You can also use this command to display the general status of all enclosure management devices connected to the controller. In addition to general status information, this command also displays status information available from the following commands: I enclosure show fan I enclosure show power I enclosure show slot I enclosure show temperature Syntax enclosure show status [{enclosure}] Parameters {enclosure} Specifies the ID associated with the enclosure management device for which you want to display status information. For this version, the controller supports a maximum of eight enclosure management devices on each bus. If you do not specify an ID, the command displays status information for all enclosure management devices connected to the controller. 9-36