Adaptec 2020ZCR Reference Guide - Page 263

enclosure Commands As the example shows, the power supply status display contains the following columns: I Enclosure I Power I State I Status The following sections describe the information that the enclosure show power command can display in these columns. The Enclosure and Power Columns The Enclosure column displays the ID associated with the enclosure management device that you specified on the command line. If you did not specify an ID, the enclosure show power command displays the IDs for all enclosure management devices connected to the controller. In the example, 0 is specified. The Power column displays the unit number associated with the power supply that you specified on the command line. If you did not specify a unit number, enclosure show power command displays the unit numbers for all power supplies on the enclosure management device or devices. In the example, there is one power supply (unit 0) each on enclosure management devices 0 and 1. The State and Status Columns The State column displays the state and the Status column displays the status of the power supply. Specifically, the column can display the items listed in Table 9-5. Status ON OFF Table 9-5 State and Status Columns State Meaning OK The power supply is on and operational. In the example, power supply 0 on enclosure management device 0 has these values. OK The power supply is off and operational. In the example, power supply 0 on enclosure management device 1 has these values. 9-30