Adaptec 2020ZCR Reference Guide - Page 260
The Enclosure and Fan Columns, The Status Column, Enclosure, Status
UPC - 760884151136
View all Adaptec 2020ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
enclosure Commands As the example shows, the fan status display contains the following columns: I Enclosure I Fan I Status The following sections describe the information that the enclosure show fan command can display in these columns. The Enclosure and Fan Columns The Enclosure column displays the ID associated with the enclosure management device that you specified on the command line. If you did not specify an ID, the enclosure show fan command displays the IDs for all enclosure management devices connected to the controller. In the example, the enclosure show fan command displays enclosure management device IDs 0 and 1. The Fan column displays the unit number associated with the fan that you specified on the command line. If you did not specify a unit number, the enclosure show fan command displays the unit numbers for all fans on the enclosure management device or devices. In the example, there is one fan (unit 0) each on enclosure management devices 0 and 1. The Status Column The Status column displays the status for each fan listed in the display. The enclosure show fan command can display the fan status values listed in Table 9-4. Table 9-4 Fan Status Values Status OK BAD NOT INSTALLED UNKNOWN Meaning The fan is operational. In the example, fan 0 on enclosure management device 0 is operational. The fan is not working properly. The fan is not installed. In the example, fan 0 on enclosure management device 1 is not installed. The status of the fan is not reportable. Or, the fan status is unknown. 9-27